Dumping Guide (redumper CLI) - Revision history

>User7: /* Irregular Disc Types */

2026-01-24T16:39:08Z

Irregular Disc Types

← Older revision		Revision as of 16:39, 24 January 2026
Line 49:		Line 49:
	# Determine a nearby number that won't touch the sectors affected by readability. For example, if the readability ends around 89900, then use 89000.		# Determine a nearby number that won't touch the sectors affected by readability. For example, if the readability ends around 89900, then use 89000.
	# redump with the following command utilizing the number you determined, example: <code>redumper --filesystem-trim --lba-end=89000</code>		# redump with the following command utilizing the number you determined, example: <code>redumper --filesystem-trim --lba-end=89000</code>
	~~# Run <code>redumper hash info --image-name=[name of files without extension]</code>~~
	# The output bin should be correct, presuming no unintentional c2 errors exist. You should only have the intentional c2 errors near the start of the disc.		# The output bin should be correct, presuming no unintentional c2 errors exist. You should only have the intentional c2 errors near the start of the disc.

>User7: /* Irregular Disc Types */

2026-01-24T16:36:42Z

Irregular Disc Types

← Older revision		Revision as of 16:36, 24 January 2026
Line 48:		Line 48:
	# Delete your error dump.		# Delete your error dump.
	# Determine a nearby number that won't touch the sectors affected by readability. For example, if the readability ends around 89900, then use 89000.		# Determine a nearby number that won't touch the sectors affected by readability. For example, if the readability ends around 89900, then use 89000.
	# redump with the following command utilizing the number you determined, example: <code>redumper --lba-end=89000~~</code>~~		# redump with the following command utilizing the number you determined, example: <code>redumper --filesystem-trim --lba-end=89000</code>
	~~# Trim the output .scram with the following command: <code>redumper --continue=split --image-name=[scram file name WITHOUT the ".scram" extension] --filesystem-trim~~</code>
	# Run <code>redumper hash info --image-name=[name of files without extension]</code>		# Run <code>redumper hash info --image-name=[name of files without extension]</code>
	# The output bin should be correct, presuming no unintentional c2 errors exist. You should only have the intentional c2 errors near the start of the disc.		# The output bin should be correct, presuming no unintentional c2 errors exist. You should only have the intentional c2 errors near the start of the disc.

>User7: /* Irregular Disc Types */

2026-01-24T16:35:01Z

Irregular Disc Types

← Older revision		Revision as of 16:35, 24 January 2026
Line 49:		Line 49:
	# Determine a nearby number that won't touch the sectors affected by readability. For example, if the readability ends around 89900, then use 89000.		# Determine a nearby number that won't touch the sectors affected by readability. For example, if the readability ends around 89900, then use 89000.
	# redump with the following command utilizing the number you determined, example: <code>redumper --lba-end=89000</code>		# redump with the following command utilizing the number you determined, example: <code>redumper --lba-end=89000</code>
	# Trim the output .scram with the following command: <code>redumper ~~protection~~ split --image-name=[scram file name WITHOUT the ".scram" extension] --~~iso9660~~-trim</code>		# Trim the output .scram with the following command: <code>redumper --continue=split --image-name=[scram file name WITHOUT the ".scram" extension] --filesystem-trim</code>
	# Run <code>redumper hash info --image-name=[name of files without extension]</code>		# Run <code>redumper hash info --image-name=[name of files without extension]</code>
	# The output bin should be correct, presuming no unintentional c2 errors exist. You should only have the intentional c2 errors near the start of the disc.		# The output bin should be correct, presuming no unintentional c2 errors exist. You should only have the intentional c2 errors near the start of the disc.

>Deterous at 07:57, 6 January 2026

2026-01-06T07:57:17Z

← Older revision		Revision as of 07:57, 6 January 2026
Line 26:		Line 26:

	===Using a Linux Computer===		===Using a Linux Computer===
	[~~to be written~~]		[[Dumping Guides/Linux Advice]]

	===Additional Parameters===		===Additional Parameters===

>Darksabre76: /* Tools */

2025-12-28T22:08:06Z

Tools

← Older revision		Revision as of 22:08, 28 December 2025
Line 3:		Line 3:
	==Tools==		==Tools==
	* [[Optical Disc Drive Compatibility\|Compatible disc drive]] ('''Required''')		* [[Optical Disc Drive Compatibility\|Compatible disc drive]] ('''Required''')
	* [https://github.com/superg/redumper redumper] - ~~If submitting to Redump,~~ use of an official build is required regardless of platform		* [https://github.com/superg/redumper redumper] - use of an official build is required regardless of platform
	* [https://github.com/SabreTools/BinaryObjectScanner BinaryObjectScanner] - to scan for copy protections.		* [https://github.com/SabreTools/BinaryObjectScanner BinaryObjectScanner] - to scan for copy protections.
	* [https://github.com/SabreTools/MPF/releases MPF.Check] - not required but can make filling submission info easier.		* [https://github.com/SabreTools/MPF/releases MPF.Check] - not required but can make filling submission info easier.

>Darksabre76: /* Tools */

2025-12-28T22:07:53Z

Tools

← Older revision		Revision as of 22:07, 28 December 2025
Line 3:		Line 3:
	==Tools==		==Tools==
	* [[Optical Disc Drive Compatibility\|Compatible disc drive]] ('''Required''')		* [[Optical Disc Drive Compatibility\|Compatible disc drive]] ('''Required''')
	* [https://github.com/superg/redumper redumper]		* [https://github.com/superg/redumper redumper] - If submitting to Redump, use of an official build is required regardless of platform
	* [https://github.com/SabreTools/BinaryObjectScanner BinaryObjectScanner] - to scan for copy protections.		* [https://github.com/SabreTools/BinaryObjectScanner BinaryObjectScanner] - to scan for copy protections.
	* [https://github.com/SabreTools/MPF/releases MPF.Check] - not required but can make filling submission info easier.		* [https://github.com/SabreTools/MPF/releases MPF.Check] - not required but can make filling submission info easier.

>User7: /* Using a macOS Computer */

2025-11-05T23:47:58Z

Using a macOS Computer

← Older revision		Revision as of 23:47, 5 November 2025
Line 22:		Line 22:
	Dumping:		Dumping:
	*Double click the "redumper" file and your dump will populate into your Macintosh HD -> Users -> [your username]		*Double click the "redumper" file and your dump will populate into your Macintosh HD -> Users -> [your username]
			Notes:
			*If you get the following pop-up "The disk you attached was not readable by this computer." click "Ignore".

	===Using a Linux Computer===		===Using a Linux Computer===

>User7: /* Using a macOS Computer */

2025-11-05T23:44:11Z

Using a macOS Computer

← Older revision		Revision as of 23:44, 5 November 2025
Line 16:		Line 16:

	===Using a macOS Computer===		===Using a macOS Computer===
	* ~~Every time you download redumper, you'll need to reestablish permissions to allow the app to run: Right-click on redumper ->~~ Open ~~-> Open. The app will open in~~ Terminal and ~~you've successfully established permissions, now quit Terminal.~~		First Time Setup:
	* ~~macOS will only allow CLI apps to run from certain directories~~, ~~put the~~ redumper ~~file into the following directory~~: ~~<code>~~/~~Users~~/~~[username]~~/bin/~~</code>~~		*Open up Terminal and:
	* ~~Insert a disc into your disc drive.~~		**Copy and paste "xattr -dr com.apple.quarantine ", then drag and drop your redumper subfolder "bin", populating a command as such: "xattr -dr com.apple.quarantine /Applications/redumper/redumper-b658-macos-arm64/bin/"
	* ~~Open Terminal and identify~~ the ~~drive number~~ your ~~disc is in with this~~ command: ~~<code>diskutil list<~~/~~code>~~		**Repeat the same with your "lib" subfolder, populating a command as such: "xattr -dr com.apple.quarantine /Applications/redumper/redumper-b658-macos-arm64/lib/"
	* Unmount the disc with <code>diskutil unmountDisk /~~dev~~/~~disk[#]</code>~~		Dumping:
	* CD to the redumper ~~app <code>~~/~~Users~~/~~[username]/bin/</code>~~		*Double click the "redumper" file and your dump will populate into your Macintosh HD -> Users -> [your username]
	* ~~Dump~~ the ~~disc with <code>./~~redumper --~~drive=disk~~[#]~~</code>. The program will detect and dump the disc, running through all of the appropriate steps, and output all of the files to an autogenerated name.~~
	* Next submit your dump to redump, see the "Submitting your Dump" section below.

	===Using a Linux Computer===		===Using a Linux Computer===

>User7: /* Collecting Information about your Disc */

2025-06-01T05:07:01Z

Collecting Information about your Disc

← Older revision		Revision as of 05:07, 1 June 2025
Line 56:		Line 56:

	Much of the required technical information such as Primary Volume Descriptor, write offset, etc. will be available in the .log file output by redumper during the dumping process. Some additional elements which are required are outlined below.		Much of the required technical information such as Primary Volume Descriptor, write offset, etc. will be available in the .log file output by redumper during the dumping process. Some additional elements which are required are outlined below.
	It is recommended to use [[https://github.com/SabreTools/MPF/wiki/MPF-Check MPF.Check] to assist with generating submission info. Otherwise, create a separate file based on [/Submission_Template Submission Template] to fill in the following information:		It is recommended to use [https://github.com/SabreTools/MPF/wiki/MPF-Check MPF.Check] to assist with generating submission info. Otherwise, create a separate file based on [/Submission_Template Submission Template] to fill in the following information:

	'''Title''': The main title of the game. If there are multiple variants of the game title given, the in-game title should take precedence. Additional titles (e.g. on the box, spine, etc.) can be added in comments using the <nowiki>[T:ALT]</nowiki> tag.		'''Title''': The main title of the game. If there are multiple variants of the game title given, the in-game title should take precedence. Additional titles (e.g. on the box, spine, etc.) can be added in comments using the <nowiki>[T:ALT]</nowiki> tag.

>User7: /* Dumping */

2025-05-19T22:55:16Z

Dumping

← Older revision		Revision as of 22:55, 19 May 2025
Line 8:		Line 8:

	==Dumping==		==Dumping==

	===Using a Windows Computer===		===Using a Windows Computer===

	Dumping discs with redumper can be extremely straightforward.		Dumping discs with redumper can be extremely straightforward.
	* Put your disc in a drive.		* Put your disc in a drive.
Line 18:		Line 16:

	===Using a macOS Computer===		===Using a macOS Computer===

	* Every time you download redumper, you'll need to reestablish permissions to allow the app to run: Right-click on redumper -> Open -> Open. The app will open in Terminal and you've successfully established permissions, now quit Terminal.		* Every time you download redumper, you'll need to reestablish permissions to allow the app to run: Right-click on redumper -> Open -> Open. The app will open in Terminal and you've successfully established permissions, now quit Terminal.
	* macOS will only allow CLI apps to run from certain directories, put the redumper file into the following directory: <code>/Users/[username]/bin/</code>		* macOS will only allow CLI apps to run from certain directories, put the redumper file into the following directory: <code>/Users/[username]/bin/</code>
Line 27:		Line 24:
	* Dump the disc with <code>./redumper --drive=disk[#]</code>. The program will detect and dump the disc, running through all of the appropriate steps, and output all of the files to an autogenerated name.		* Dump the disc with <code>./redumper --drive=disk[#]</code>. The program will detect and dump the disc, running through all of the appropriate steps, and output all of the files to an autogenerated name.
	* Next submit your dump to redump, see the "Submitting your Dump" section below.		* Next submit your dump to redump, see the "Submitting your Dump" section below.

			===Using a Linux Computer===
			[to be written]

	===Additional Parameters===		===Additional Parameters===